Difference between revisions of "Vacuum Former"
|Line 1:||Line 1:|
[[File:.|thumb|right|The Idea Shop's 686 Formech Vacuum Former]]
Revision as of 22:39, 2 November 2018
The Formech 686 Vacuum Former enables users to heat a variety of materials, such as ABS or plastic, to make a mold of an object.
- General Stats:
- Price : The cost of 1 sq ft of your desired material
- Maximum Part Size : 305 mm x 305 mm (12 in x 12 in)
Creating Your Model
The IdeaShop offers a variety of methods to create models and bases for your mold. For example, a thin mold can be created by filling in holes of a material that has been lasercut. You may also use Legos to build a case to be molded. Get creative; you can make a mold of anything as long as it fits in a 12" x 12" square.
Using the Formech
The Vacuum Former is extremely simple to use. First, turn the heaters on and give the machine time to warm up. Next, get help from an IdeaShop employee to determine what settings would be best for your material. If you are using PETG, there are pre-made setting to use; pick according to your specific thickness. Finally, secure your model to the base of the vacuum former using double-sided tape. Once everything is secure, lower the bed and place your material on the visible square. Close and lock the top of the vacuum former and wait for your material to heat.
As your material heats up, it will become wavy and flimsy. Watch for the material to flatten out; once it does, open the top and press and hold the two buttons on the front of the machine to quickly raise the bed. The melted material will cover your model to create a mold.
Using the vacuum former can get confusing; please ask any IdeaShop employee for help using the machine if needed.