Difference between revisions of "Table Saw"

From Idea Shop Wiki
Line 1: Line 1:
 
<div class="alert alert-auto alert-danger" role="alert" style="font-weight:bold; text-align:left;"><span class="glyphicon glyphicon-alert" aria-hidden="true"></span>&nbsp;Use of this tool requires prior safety training and approval from Idea Shop personnel.</div>
 
<div class="alert alert-auto alert-danger" role="alert" style="font-weight:bold; text-align:left;"><span class="glyphicon glyphicon-alert" aria-hidden="true"></span>&nbsp;Use of this tool requires prior safety training and approval from Idea Shop personnel.</div>
 +
 +
==Machine Details==
 +
----
 +
===Saw Stop===
 +
*Still dangerous! If blade is touched, Saw Stop prevents your entire finger from being totally cut off - blade can still give you a nasty cut
 +
*If you set off the Saw Stop, there will be a $200 replacement fee
 +
 +
===Approved Materials===
 +
*Woods (MDF, plywood is okay)
 +
**If you are using reclaimed wood, it is your responsibility to remove any and all metal from the wood (staples, nails, screws, etc) before it is cut - metal WILL set off the saw stop!
 +
**WOOD MUST BE DRY - if you attempt to cut wet wood or wood that has just been glued, you will set off the saw stop!
 +
*Some plastics (polypropylene, acrylic)
 +
**Blade must be changed to accommodate material other than wood - ask a staff member!
 +
*Prototyping materials such as chip board, foam core, cardboard, insulation foam
 +
 +
==Safety Instructions==
 +
----
 +
  
 
<div class="alert alert-warning" role="alert" style="font-weight:bold; text-align:center">Under Construction</div>
 
<div class="alert alert-warning" role="alert" style="font-weight:bold; text-align:center">Under Construction</div>

Revision as of 18:43, 11 September 2019

Machine Details


Saw Stop

  • Still dangerous! If blade is touched, Saw Stop prevents your entire finger from being totally cut off - blade can still give you a nasty cut
  • If you set off the Saw Stop, there will be a $200 replacement fee

Approved Materials

  • Woods (MDF, plywood is okay)
    • If you are using reclaimed wood, it is your responsibility to remove any and all metal from the wood (staples, nails, screws, etc) before it is cut - metal WILL set off the saw stop!
    • WOOD MUST BE DRY - if you attempt to cut wet wood or wood that has just been glued, you will set off the saw stop!
  • Some plastics (polypropylene, acrylic)
    • Blade must be changed to accommodate material other than wood - ask a staff member!
  • Prototyping materials such as chip board, foam core, cardboard, insulation foam

Safety Instructions



Machine Proficiency


In order for an individual to advance in machine proficiency they must demonstrate ability to perform certain actions or tasks. All levels include abilities and concepts from lower levels.

This section is primarily for student workers.

Level 0

Individual has demonstrated they are capable of:

  • Knowledge for Proper Use
  • Safe materials for use with the table saw
  • Basic safety precautions (sleeves, headphones, hair, body awareness)
  • Attire, do’s and dont’s, etc
  • Locking & unlocking, starting the machine

Individual understands the concepts:


Level 1

Individual has demonstrated they are capable of:

  • Set blade height
  • Set fence distance
  • Straight cut (with and without push stick)
  • Crosscut with sled and with miter gauge
  • Cutting grooves

Individual understands the concepts:


Level 2

Individual has demonstrated they are capable of:

  • Angle cuts
  • Changing a blade
  • SawStop override with key
  • Miter joints
  • Lap joints

Individual understands the concepts:


Level 3

Individual has demonstrated they are capable of:

  • Machine Management
  • Managing error codes
  • Changing SawStop mechanism
  • Changing writhing knife

Individual understands the concepts: