The Monoprice Mini Select v2, developed by Monoprice, is a (FDM) machine, also known as a 3D Printer. This printer is unique for the IdeaShop, in that it is not supported. The printer is merely housed in the 3D printing area, for use by students at absolutely no cost. Students are responsible for all aspects of using the machine, as laid out on this page. Please make an effort to follow the suggested settings, and try to keep your prints as short as possible. When in use, you MUST be present to watch the printer, or have a friend stay and watch the printer. It is a fire hazard.
This printer is much more simple than others available in the lab. It may not be able to handle complex geometry. If complex geometry is needed, please use a different printer available.
- General Stats:
- Material : Polylactic Acid (PLA)
- Maximum Part Size : 120mm x 120mm x 120mm (4.7in x 4.7in x 4.7in)
- Layer Thickness : Customizable
- Resolution : 100 microns (0.1 mm)
- Program : Cura
- Suggested Settings :
- Nozzle Temperature : 200 Celcius
- Bed Temperature : 60 Celcius
- Layer Height : 0.1313 mm
- Initial Layer Height : 0.2625 mm
- Infill Density : 22%
- Build Plate Type : Raft
Choosing a pre-set profile will help make life easier.
First, use Netfabb to make sure there are no issues with your file. It MUST be one shell. See more at Fixing STLs. Once the files are properly prepared and saved as STLs, open the files you want to print and place them on the bed as desired. To the right, make sure the settings are set according to our suggestions above. To ensure that support material will be created, enter Layer view. Support material made by this printer can NOT be disolved and must be removed from the part manually. Once ready, press .......
Leveling the Bed
First, home the printer and turn off the power. Using paper, set the height of the head to the thickness of a page of A4 printer paper. Manually move the head to each of the corners and adjust the springs using a 5/64ths hex bit.
Changing the Material
PLA is the only material that can be used with this printer.
DO NOT USE SHARP OBJECTS TO REMOVE A PART! It damages the bed of the printer.