From Idea Shop Wiki
Revision as of 17:22, 11 March 2022 by Darechiga (talk | contribs)
Form2 3D Printer in the Maker Space

The Form 2 3D printer ,developed by formlabs, is a stereolithography (SLA) machine that creates parts using a liquid plastic that is solidified layer by layer using UV light. Resolution can be adjusted to anywhere from 25 to 100 microns per layer.


Main Article : About the Form2

General Stats:
Material : Plastic Resin (Liquid) in clear, grey, white or elastic
Price : Starts at $0.50/cm^3
Maximum Part Size : 144mm x 144mm x 175mm (5.7in x 5.7in x 6.9in)
Layer Thickness : 25, 50, or 100 microns (0.025,0.05, or 0.1 mm)
  • Highly Detailed
  • Sturdy Parts
  • Multiple are resins available
  • Expensive
  • Extremely Slow
  • Support Structures may cause defects


Processing 3D Files

Main Article : Processing 3D Files
Good STL in Netfabb

After you have designed the 3D model of your desired part, export the part in the StereoLithography (.stl) file format. The .stl format describes only the surface geometry of the object instead of the object as a whole. Then open the file in the Autodesk Netfabb software to repair the file.

We will only process STLs which have:
1 shell per continuous part
0 border edges
0 invalid orientations
0 holes.

Even if Netfabb reports no invalid orientations, red triangles are present in repair mode there is a problem with your model. Print at your own risk.

Fixing a File

Main Article : Fixing STLs

Students are welcome to use any of our computers for fixing their files in Netfabb or Rhino.

Here are some tips to get you started at home:
  • Ideally in Rhino you want one closed polysurface before meshing.
  • NetFabb is better at meshing than Rhino. Consider opening the 3dm file in NetFabb to generate the STL instead.
  • In Netfabb, the default repair is decent at fixing holes, border edges, and invalid orientations. Then try performing a boolean join to reduce shells down to 1.
  • If performing a boolean join results in multiple shells then most likely the shells are not contiguous, or connected. Consider deleting extra shells in model.
  • Extended repair wraps an existing STL in a new mesh. This can severely alter geometry and result in thin walled sections (not recommended).


Main Article : Printing

Once a file has been processed and is ready to be printed, find an Idea Shop Staff member to add your job to the queue. The length of the queue is highly variable, and the time it takes to print a model may range from a few days to being ready by the end of the day it is submitted. Keep in mind that the Form2 queue is very full during finals, midterms, and the time proceeding IPRO Day. An estimate of queue length and a time to come pick up the part will be communicated to you once your part is added to the queue. Once a part is successfully in the queue, it is ready to be printed. A simple small part can take as little as an hour to print, while a very complex part could take several days to print. The exact printing time will be shown before your part is added to the queue

Post Printing

Cleaning and Curing Parts

Washing and curing station for Form2 printed models

Once printing is complete, the part will be removed from the printer by an Idea Shop Staff member and run through the post-printing treatment to stabilize the piece; Please allow 1-2 hours for post-printing treatment.

Once the part has been removed from the from the build plate, the part will be placed in an Isopropyl Alcohol (IPA) bath to remove any extra uncured resin.

  • Removing a part involves: wearing gloves, removing build plate, removing part from plate, removing any particles of cured resin from liquid resin bath, using correct settings for alcohol bath.
  • Any tools used to remove the part must be scrubbed down with IPA to clean off uncured resin.

Safety Notice: Uncured resin is toxic, and should not come into contact with skin or eyes. Always wear gloves and safety glasses when near uncured resin.

CLEAN UP: If isopropyl alcohol comes in contact with orange plastic window, the plastic will become brittle and crack. DO NOT clean orange case with IPA!

Some parts may also require curing in the UV chamber to stabilize the component.

  • There must be an extra 30 min in between the wash and the bake in order to make sure all alcohol has evaporated to minimize combustion risk.

Refer to for curing chamber settings.

Using the Form 2 Cure is optional, but highly recommended to ensure that the part is cured uniformly. Afterwards, the student will be responsible for removing supports; any marks left by the supports can be sanded away.

Machine Proficiency

In order for an individual to advance in machine proficiency they must demonstrate ability to perform certain actions or tasks. All levels include abilities and concepts from lower levels.

This section is primarily for student workers.

Level 0

Individual has demonstrated they are capable of:

  • Student can turn the machine, bath, and curing chamber off and on

Individual understands the concepts:

  • The Form2 uses a UV laser to cure the resin to create the print.
  • Wall thickness requirement for Form2.
  • A remote desktop account is required to send the file to the printer.

Level 1

Individual has demonstrated they are capable of:

  • Correctly loading and sending file to Form2 queue
  • Analyzing a student's file with a Netfab proficiency level of 3 to prepare for printing
  • Correctly starting a print job

Individual understands the concepts:

  • How to optimally place part on build plate (don't orient the bottom of the part to be parallel or perpendicular with the plate. Rather, angle large flat surfaces)

Level 2

Individual has demonstrated they are capable of:

  • Swapping resin cartridges and tanks
  • Removing a printed part from inside the Form2 (including bed cleanup)
  • Post-processing in the IPA bath and heater

Individual understands the concepts:

  • Proper cleanup techniques
  • Wait time between bath and curing chamber

Level 3

Individual has demonstrated they are capable of:

  • Correct disposal for empty resin cartridges and tanks

Individual understands the concepts:

  • Each material has different settings for optimal results.


Location of Form 2 3D Printer in the Assembly Area