Difference between revisions of "EOS Formiga P110 SLS"

From Idea Shop Wiki
(Created page with "==About== ---- info about eos formiga ;General Stats<nowiki>:</nowiki> :'''Material :''' White Nylon PA1100 :'''Maximum Part Size :''' 260mm x 260mm x 200mm (10in x 10in x 8i...")
 
 
(3 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
==About==
 
==About==
 
----
 
----
info about eos formiga
+
The EOS Formiga is located at mHUB, and file submissions should be done through IIT's Ideashop. This machine creates high resolution, high strength plastic parts.
  
 
;General Stats<nowiki>:</nowiki>
 
;General Stats<nowiki>:</nowiki>
 
:'''Material :''' White Nylon PA1100
 
:'''Material :''' White Nylon PA1100
:'''Maximum Part Size :''' 260mm x 260mm x 200mm (10in x 10in x 8in)
+
'''Maximum Part Size :''' 184mm x 233mm x 316mm (7.2in x 9.1in x 12.4in)
:'''Layer Thickness :''' 0.016mm (0.00063in)
+
:'''Layer Thickness :''' 0.1 mm
 +
:'''X/Y Minimum wall thickness :''' 1 mm
 +
:'''X/Y Minimum wall thickness for mechanical properties :''' 1.5 mm
 +
:'''Price :''' $0.75 per cubic cm
  
 
<div class="col-md-12">
 
<div class="col-md-12">
Line 13: Line 16:
 
<div class="panel-heading">Strengths</div>
 
<div class="panel-heading">Strengths</div>
 
<div class="panel-body">
 
<div class="panel-body">
*Easy to remove Support
+
*thin minimum wall thickness
*Reliable continuous printing
+
*thin minimum layer thickness
 +
*does not require supports
 +
*porous surface allows for dyeing post-print
  
 
</div>
 
</div>
Line 23: Line 28:
 
<div class="panel-heading">Weaknesses</div>
 
<div class="panel-heading">Weaknesses</div>
 
<div class="panel-body">
 
<div class="panel-body">
*Monochromatic<nowiki>:</nowiki> One color per part.
+
*More brittle than SLA prints
*Highest cost Printer
+
*Porous surface may require water proofing for some applications
 +
*Part expands during sintering and shrinks during cooling. This may result in inaccurate dimensions.
 
</div>
 
</div>
 
</div>
 
</div>
Line 56: Line 62:
 
==Printing a Part==
 
==Printing a Part==
 
----
 
----
Once a file has been processed and is ready to be printed, find a shop supervisor to help add it to the queue. The queue will be sent to mHUB for printing.
+
Once a file has been processed and is ready to be printed, find a shop supervisor to help add it to the queue.  
 +
;The queue will be sent to mHUB for printing once a week!
 +
Estimate that it will take 1 week to receive your print after submitting to the queue.

Latest revision as of 22:37, 28 September 2020

About


The EOS Formiga is located at mHUB, and file submissions should be done through IIT's Ideashop. This machine creates high resolution, high strength plastic parts.

General Stats:
Material : White Nylon PA1100

Maximum Part Size : 184mm x 233mm x 316mm (7.2in x 9.1in x 12.4in)

Layer Thickness : 0.1 mm
X/Y Minimum wall thickness : 1 mm
X/Y Minimum wall thickness for mechanical properties : 1.5 mm
Price : $0.75 per cubic cm
Strengths
  • thin minimum wall thickness
  • thin minimum layer thickness
  • does not require supports
  • porous surface allows for dyeing post-print
Weaknesses
  • More brittle than SLA prints
  • Porous surface may require water proofing for some applications
  • Part expands during sintering and shrinks during cooling. This may result in inaccurate dimensions.


Processing


Main Article : Processing 3D Files
Good STL in Netfabb

After you have designed the 3D model of your desired part, export the part in the STereoLithography (.stl) file format. The STL format describes only the surface geometry of the object instead of the object as a whole. Then open the file in the Autodesk Netfabb software to repair the file.

We will only process STLs which have:
1 shell per continuous part
0 border edges
0 invalid orientations
0 holes.

Even if Netfabb reports no invalid orientations, if we see red triangles in repair mode there is a problem with your model. Print at your own risk.

Fixing a File

Main Article : Fixing STLs

Students are welcome to use any of our computers for fixing their files in Netfabb or Rhino.

Here are some tips to get you started at home:
Ideally in Rhino you want one closed polysurface before meshing.
NetFabb is better at meshing than Rhino. Consider opening the 3dm file in NetFabb to generate the STL instead.
Default repair is decent at fixing holes, border edges, and invalid orientations. Then try using boolean join to reduce shells down to 1.
If boolean join results in multiple shells then most likely the shells are not contiguous. Consider deleting extra shells in model.
Extended repair wraps an existing STL in a new mesh. This can severely alter geometry and result in thin walled sections.

Printing a Part


Once a file has been processed and is ready to be printed, find a shop supervisor to help add it to the queue.

The queue will be sent to mHUB for printing once a week!

Estimate that it will take 1 week to receive your print after submitting to the queue.