Cordless Drill

From ProtoLab Wiki
Revision as of 19:11, 15 August 2017 by Srodrig (talk | contribs)
Ryobi drill 1.jpg

A cordless drill is an electric drill which uses rechargeable batteries. These drills are available with similar features to an AC mains-powered drill. ... They are available in the hammer drill configuration and most have a clutch, which aids in driving screws into various substrates while not damaging them.


Machine Details


Example of this section is blade types for saws.

When images need to be next to indented text use the following:

An image.
The
indented
text
goes
here.

It resizes to device screens much better this way. Check out the bandsaw page for an example.


Safety Instructions


Power Drill Safety: Avoid Baggy Clothing. Loose sleeves, jewelry and hair can be a hazard when you are operating a power drill. Wear Protective Gear. Secure Your Work Piece. Drill Pilot Holes. Use a Drill Stand. Properly Set the Drill Bit. Use a center punch to start Holes. Apply Proper Pressure to the Drill.

Preparation

Preparing machine and material.

Active Use

Using the machine.

Clean Up

Sweep/vacuum any debris and clean/deburr any holes and put away drill bits & countersinks that were used.


Best Practices


How to best use this machine. This is not safety it is best practices.