Cleaning a Part : Form2

From Idea Shop Wiki
Revision as of 17:13, 9 September 2019 by Pkarnia (talk | contribs) (Pkarnia moved page Cleaning a Part: Form2 to Cleaning a Part : Form2 without leaving a redirect)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Once printing is complete, the part is removed from the printer and placed in a chemical bath to remove any extra, uncured resin. Some parts may also require post-curing to stabilize the component. Please allow 1-2 hours for post-printing treatment. Afterwards, the student will be responsible for removing supports; any marks left by the supports may be sanded away.

Refer to https://support.formlabs.com/s/article/Form-Cure-Time-and-Temperature-Settings?language=en_US for curing chamber settings.