Cleaning a Part : Form2
From ProtoLab Wiki
Revision as of 17:13, 9 September 2019 by Pkarnia (talk | contribs) (Pkarnia moved page Cleaning a Part: Form2 to Cleaning a Part : Form2 without leaving a redirect)
Once printing is complete, the part is removed from the printer and placed in a chemical bath to remove any extra, uncured resin. Some parts may also require post-curing to stabilize the component. Please allow 1-2 hours for post-printing treatment. Afterwards, the student will be responsible for removing supports; any marks left by the supports may be sanded away.
Refer to https://support.formlabs.com/s/article/Form-Cure-Time-and-Temperature-Settings?language=en_US for curing chamber settings.
